Bubbles in house conditions. Soap bubbles at home - recipes, proportions of components and safety rules. How to make soap bubbles, recipe for soap bubbles, composition for soap bubbles

There are many recipes for homemade soap bubbles that you can try even if you already know how to make them at home. Some of them are really very simple, with ingredients that we are 99.9% sure you have in your home. Other recipes for how to make soap bubble solution may raise some questions.

For the simplest recipes for homemade soap bubbles, all you need is liquid soap and water. But there are several soap bubble recipes that include unexpected ingredients. Here are some questions about how to make soap bubbles at home and the answers to them. Then we move on to recipes for homemade soap bubbles.

Where can I buy glycerin?

Glycerin can be purchased at most supermarkets in the baking section (along with cake decorating supplies) or at your regular pharmacy. Also, if you want to order it online, you can find several options in online stores.

Why is sugar needed in a homemade soap bubble recipe?

Even if you've tried making homemade soap bubbles before, the recipe with sugar might surprise you. Sugar makes soap bubbles stronger and more resilient. Thanks to sugar, soap bubbles last longer, which your baby will love.

Why does the soap bubble recipe include corn syrup?

Corn syrup works just like sugar - it helps make your soap bubbles firmer and last longer. This is just another option on how to make strong soap bubbles at home.

What soap should not be used for homemade soap bubbles?

You should not use cheap liquid soap for homemade soap bubbles, which is usually sold in shops "All for 2 hryvnias" and the like, or on the lowest shelves in shops and supermarkets. As a rule, they are too heavy to make good soap bubbles - the soap just settles at the bottom.

Can homemade soap bubbles be blown indoors?

The basic recipe for homemade bubbles should not pose any problem for indoor use. It's just diluted soap! But with soap bubble solutions containing sugar and corn syrup, you need to be careful, as they can leave sticky marks on surfaces. And finally, the recipe for beautifully colored soap bubbles contains a small amount of food coloring, so they are probably best used outdoors.

How to store homemade soap bubbles?

Store all homemade soap bubbles in an airtight, labeled container. Also, a clean glass bottle of spaghetti sauce or any other container that closes tightly is great for storing them.

How long can homemade soap bubbles be stored?

Many soap bubbles, in fact, only get better with time. If the bubble solution has been sitting for several weeks, stir it gently to combine the components that may have separated in the meantime. Do not shake the container; you want to save this foam for bubbles!

How to make strong soap bubbles (Recipes)

The basic recipe for homemade soap bubbles

  • 1 glass of water;
  • 1 tablespoon of dishwashing liquid.

How to make soap bubbles: Mix water and dishwashing liquid in a cup or bottle. Mix carefully and thoroughly. Dip a bubble stick into the solution and get to work!

sugar bubble recipe

  • 4 glasses of warm water;
  • 1/2 cup sugar;
  • 1/2 cup dishwashing liquid.

How to make soap bubbles: Mix sugar and warm water. Stir until the sugar is completely dissolved. Add dishwashing liquid and stir again. Store in an airtight container.

Soap bubbles recipe with glycerin

  • 1 glass of warm water;
  • 2 tablespoons of liquid soap or washing powder;
  • 1 tablespoon of glycerin;
  • 1 teaspoon white sugar.

How to make soap bubbles: Gently mix all ingredients together and store in an airtight container. You will get very strong soap bubbles! If you do it right, they will be so strong that you can simply lose sight of them before they burst!

Jelly soap bubbles

  • 1 part dishwashing liquid;
  • 1 part gelatin or jelly powder
  • 8-10 parts warm water.

How to make soap bubbles: Carefully combine all three components. Avoid creating foam by mixing too vigorously. If you take a bright fruit jelly mix, you will get unusual colored soap bubbles. They are best worn outside.

Soap bubbles "no tears"

  • 1/4 cup "no tears" baby shampoo
  • 3/4 cup of water;
  • 3 tablespoons of corn syrup.

How to make soap bubbles: Mix all the ingredients and then wait for the bubbles to settle before using.

Colored soap bubbles (with food coloring)

  • 1/3 cup dishwashing liquid;
  • 1 1/4 cups of water;
  • 2 teaspoons of sugar;
  • 1 drop food coloring

How to make soap bubbles: Mix all ingredients in a jar or other resealable container. Only use them outdoors to avoid color marks on your walls, carpets and upholstery.

Eco soap bubbles

  • 1/4 cup eco, biodegradable dish soap
  • 1 glass of water;
  • 1 teaspoon of glycerin.

How to make soap bubbles: Mix all ingredients in a resealable container. Let stand overnight for best results.

Now you know so many different options on how to make soap bubble solution with and without glycerin at home that will keep the kids busy until the end of summer!


Do you want to please your child with big soap bubbles? Those that sell small ones and they are not enough for a long time? We have written detailed instructions on how to make soap bubbles at home with the tools that we always use in everyday life.

To make soap bubbles at home, we need:

1. Ordinary water (preferably distilled or boiled).

2. Dishwashing liquid (liquid).

3. Shampoo.

4. Sugar.

5. Laundry soap.

6. Glycerin (we buy at any pharmacy, without a prescription).

7. Ammonia.

8. A straw (a straw for cocktails or a regular tube).

Glycerol- exactly the remedy that makes the walls of the soap bubble stronger, and the bubble itself, respectively, more long-lived.



Note. We use distilled water.

Sugar. A spoonful of sugar so that the bubbles do not burst for a long time.

Instruction -


Soap bubbles recipe.First way.


Proportion: 1/6 glycerin, 1/6 liquid dishwashing detergent, 2/3 water. We mix and inflate our soap bubbles.

Soap bubbles recipe.Secondway.


We take any convenient large container (glass or bowl), pour 300 ml. water and add 100 ml. shampoo (we take any of your choice). Add 2 tablespoons of glycerin and 1 teaspoon of sugar. We mix everything thoroughly and enjoy the big soap bubbles with our own hands. There will not be many bubbles, but large ones, they fall for a long time and will not burst quickly.


Soap bubbles recipe.Thirdway.


We mix 300 ml. water, 50 ml. glycerin and 100 ml. liquid dishwashing detergent. We stir our ingredients well and admire the soap bubbles that you have prepared yourself. There will be a lot of bubbles, they quickly reach the floor and burst.

Soap bubbles recipe.Fourth way.


We take l any shampoo for children or ordinary 200 ml. mix with 400 ml. distilled water. We leave for a day to settle our solution. Then add 3 tablespoons of glycerin.

Soap bubbles recipe.Fifth way.


Ber yo m shampoo 100 ml. add 200 ml. warm water and 3 tablespoons of sugar. Cheap and cheerful bubbles at home are ready.

Soap bubbles recipe.Sixth way.


We mix 200 ml. shampoo, 200 ml. shower gel, 200 ml. liquid dishwashing detergent, 100 ml. water. We get a lot of big bubbles.

Soap bubbles recipe.Seventh way.


We mix the gel for intimate hygiene and distilled water (or plain water). It also makes good bubbles.

Soap bubbles recipe.Eighth way.

Pour 300 ml into a bowl. water, add 100 ml. glycerin, 10 drops of ammonia. In a separate container, grate 50 g of laundry soap and boil over a fire so that it dissolves faster. Add it to the main solution. Mix all ingredients. The solution should be infused for 2-3 days, then filter it and put it in the refrigerator for 12 hours before use. Soap bubbles prepared by this method take a long time, and the blowing effect is the same as by the first method, only the bubbles do not burst longer.

Video -Woh soap bubbles


When the summer time comes, the children begin to look for an interesting activity for themselves. Soap bubbles - that's what can interest playful kids. It is about the bubbles that will be discussed in our material.

  • You can inflate bubbles from an ordinary foaming agent, but the most ideal is the one that includes the addition of household soap
  • Set it up, dissolve it in hot water, you can warm it up very much
  • Ratio: 10 parts water to 1 part soap

A solution prepared with the addition of glycerin is considered the most durable. Also strength brings granulated sugar and gelatin. The proportions are as follows:

  • glycerin must be added 1/3 of the volume of the soap solution
  • sugar - ¼
  • gelatin - ¼

We suggest you prepare such a composition. To do this, combine a liter of water with:

  • Detergent - 200 ml
  • Glycerin - 100 ml
  • Sugar sand - 50 g
  • Gelatin - 5 g

Cooking process:

  • Take gelatin. Soak it in water. Set it aside to let it swell.
  • Strain the resulting composition
  • Remove excess water
  • Take granulated sugar and swollen gelatin. Melt these ingredients (they should not boil)
  • Add water and the remaining ingredients to the resulting composition.
  • Mix the solution well (there should be no foam)

How to make soap bubbles at home recipe

Of course, the main elements for making bubbles are: a solution with sticks through which you will release those very transparent balls. Before you decide to make bubbles, we suggest that you familiarize yourself with some recommendations:

  • Make soap bubbles better from boiled water. But the best solution is to use distilled water.
  • The final result, first of all, depends on how many impurities will be in the agent that you use to make the solution. The fewer such impurities in the product itself, the better the result.
  • If you want to prepare a dense solution, it is better to use sugar or glycerin dissolved in warm water. But you should remember that it is better not to overdo it in the manufacture, since a large amount of sugar or glycerin may interfere with blowing bubbles.
  • If your solution is not very dense, then the bubbles will not be stable. However, there is a good point - the bubbles will be blown out easier.
  • For best results, allow your own solution to stand for up to 20 hours before use.
  • Before blowing bubbles, wait until a solid film is formed without extraneous bubbles at the edges. It is better to remove the foam altogether: put the solution so that it is infused, then cool it. These manipulations will allow you to get rid of all the foam.
  • Blowing bubbles during wind and strong dust is quite difficult. It is better to blow them out when there is a lot of moisture in the air.

In order to prepare a good soap bubble detergent, you need the following elements:

  • 200 ml water
  • 50 g shampoo
  • Mix thoroughly. Such a small amount of ingredients will not prevent you from creating excellent bubbles. Everything is the opposite. Such a composition will strengthen the bubbles themselves, after you blow them out, they will not burst for a very long time.
  • Use a regular drinking straw.
  • Dip it in the solution.
  • If you want to test the product itself, dip your finger in it and try to pop the vial. If you manage to do this, then your solution has not yet prepared.
  • Add some more soap to this remedy.

To blow transparent balloons, you can use the following elements:

  • Cocktail straw (split it at the tip in advance)
  • Housing from a conventional pen
  • pasta
  • funnel
  • Plastic bottle (cut off the bottom of the bottle)
  • With your palm

You can also use a frame made of wire or a special gun.

How to make soap bubbles without glycerin?

You must have seen happy kids blowing soap bubbles. Yes, you yourself will never pass by, you will definitely want to burst a small balloon and show the kids how you previously inflated big bubbles.

Currently, such pleasure is quite expensive, and it ends very quickly. But you can prepare the remedy yourself without using glycerin for this. We offer you several good soap options, for the preparation of which you will have to spend a minimum amount of ingredients.

Simple Recipe:

To prepare this recipe, you need the following ingredients:

  • Any washing liquid - 1.5 cups
  • Water - 0.5 l
  • Sugar - 2 tsp

Cooking process:

  • Take these ingredients
  • Mix them well
  • Remove the resulting composition for 24 hours in a cool place

If you want to get colored bubbles, then add a small amount of dye to the resulting solution.

Bubbles for babies:

And you will prepare this recipe if you take:

  • 500 ml boiled water
  • 100 ml of baby shampoo and sugar

Cooking process:

  • Mix the resulting composition well and put in a cool place for 24 hours.
  • Then add granulated sugar to the product. Thanks to him, your bubbles are very strong.

Aroma Bubbles:

To prepare a remedy for fragrant bubbles, stock up:

  • Means that will cause foam (detergent, shampoo, gel) - 300 ml
  • Water - 100 ml
  • essential oil

Cooking process:

  • Mix water with bubble bath
  • Add oil to the resulting composition

Your bubbles will turn out colorful and very fragrant.

Inexpensive recipe:

In order to get a remedy for bubbles, mix:

  • Boiled water - 8 tbsp
  • Laundry soap
  • Sugar or gelatin - 3 tsp
  • essential oil

Cooking process:

  • Boil water first
  • Grate the soap. Add gelatin or sugar to it
  • Then boil the resulting product over low heat to completely dissolve the soap. At the same time, stir the composition
  • Add some essential oil (a few drops). So you will remove the smell of soap

Making soap bubbles using glycerin

As a rule, transparent bubbles are prepared from the following ingredients:

  • Detergent for dishes. There is no exact type of detergent that is ideal for balloons. Try the one you use yourself.
  • Soap. The most ideal soap is laundry soap.
  • Water. Treat this ingredient with special care. Tap water is not suitable for the solution, as it contains a variety of salts. It is better to boil it before use, give the water some time to settle.
  • Glycerin. This component is responsible for making the bubbles strong, colored and of different sizes. You can buy glycerin at any pharmacy in your city.

So let's explore some great glycerin recipes together that you and your kids can make.


First recipe:

If you want to make a bubble solution according to this recipe, take:

  • Washing liquid - 100 ml
  • Water - 300 ml
  • Glycerin - 50 ml

Cooking process:

  • Mix these ingredients

Do not use tap water. Since it contains a lot of salts, it has a bad effect on the film.

Second recipe:

To prepare this recipe, you will have to spend several days and stock up on the following ingredients:

  • Boiled hot water - 150 ml
  • Glycerin - 75 ml
  • Ammonia - 5 caps
  • Washing powder - 12.5 g

Cooking process:

  • Mix all ingredients well
  • Leave the composition for a couple of days to infuse
  • When 2 days have passed, filter the product and place it in a cool place for 10 hours

Creating a solution for soap bubbles

The solution that you prepare at home will turn out good if you can immediately inflate a bubble with a diameter of about 10 cm. If the bubble is smaller, then add a little more soap to the solution.

  • If you wish the balls to turn out fragrant, for example, with the smell of strawberries or chocolate, then add bath foam to the solution. Mix it with soap in such a proportion - three parts of fragrant foam to one part of ordinary water.
  • If you want colorful bubbles different shades Then add food coloring to the solution. You can divide the product into several parts, and add a different paint to each part.

Now try to prepare such a solution. To prepare it, you will need to stock up on simple and affordable components, namely:

  • Glycerin with hot water - 300 and 150 ml
  • Washing powder - 25 g
  • Ammonia - 10 caps

Cooking process:

  • Pour these ingredients into a jar.
  • Mix everything well.
  • Then leave the resulting composition aside for a couple of days. You can extend the deadline by one day.
  • After that, take out the product, strain it through a sieve or gauze.
  • Place the composition again in a cool place for 12 hours.

Yes, you will spend a lot of time preparing the solution. But the result will pleasantly surprise you.

How to make soap bubbles that don't burst?

People first learned about soap bubbles in the 1st century AD. Archaeologists have even been able to find frescoes in Pompeii depicting people indulging in this fun. Despite the fact that a lot of time has passed, bubbles have not lost their popularity.

Now a solution for blowing soap bubbles can be purchased in almost every store. But is it possible to find such a tool from which strong and non-bursting bubbles are obtained? Probably not. If you want to prepare this solution yourself, you need to remember about:

  • Sugar syrup - 120 ml (you will find its preparation below)
  • Soap shavings - 200 g
  • Glycerine - 400 g
  • Cool boiled water - 800 ml

Cooking process:

  • Mix all ingredients
  • Mix them well and you can inflate your bubbles

The process of making sugar syrup:

  • Take granulated sugar (50 g)
  • Add water to it (10 ml)
  • Mix the ingredients well

Sugar syrup is ready.

The solution that you prepare from these components will help you fulfill your childhood fantasies. You will even be able to arrange an interesting show with soap bubbles, and invite the neighbor's kids to visit. You can make the most unusual figures out of this solution, just connect these strong bubbles between each other.

Making big bubbles

If you want to blow huge soap bubbles, you don't have to run to the store to buy bubble solution. You may not even find one for sale. You can cook it yourself at home. Just try to follow our recommendations:

  • Use only distilled water to prepare the solution. Heat it up, then pour it into the dishes prepared in advance.
  • As a dish for the solution, take a container that will have a wide lid. So you can lower your own inflatable element without problems.
  • If you want to use a glass container, then pour hot water into this container slowly so that the walls of the vessel warm up gradually. Otherwise, the glassware will simply burst.

Now let's move on to the solution itself, from which you will get large bubbles. To prepare it, you need to stock up on the following components:

  • Water - 1 l
  • Dish detergent or shower gel - 200 ml
  • Glycerin - 25 ml
  • Personal lubricant (optional, but its base should not be oily) - 25 ml
  • Chopsticks 30 cm - 2 pcs
  • Cotton rope - approximately 50 cm (maximum 80 cm)
  • Gadget

Cooking process:

  • Just mix all ingredients
  • Wait a few hours for the solution to infuse

If you want to quickly start inflating soap balloons, then:

  1. Mix shower gel (150 ml) with water.
  2. Add more glycerin and mix thoroughly. Make sure that no foam appears during mixing.
  3. If this happens, be sure to remove it. If you want to experiment, then add other ingredients to the composition.

Now prepare the bubble blower:

  • Take the rope
  • Put a nut on it
  • Tie a rope to the ends of the sticks
  • Then soak the tips of the sticks on which you tied the rope into the solution
  • Get out the sticks, straighten them out
  • Wave them and you will see a big bubble inflate

How to make water for soap bubbles?

The recipes and tips don't end there. You can also prepare special water, from which you will get "viscous bubbles". To prepare this unique remedy, combine the detergent with:

  • water
  • Sugar sand - 1 tbsp

Cooking process:

  • We did not specify the amount of detergent and water. You will have to choose the right proportion yourself.
  • Add sugar to them.
  • Mix the ingredients well.
  • Set aside the remedy for a while so that it is infused.

Everything, the solution is ready for use!

How to make soap bubbles for kids

We have already written a solution for inflating bubbles intended for children. But we want to offer you a recipe for the preparation of which you need:

  • Shampoo without tears - 200 ml
  • Boiled water - 2 tbsp
  • Sugar - 3 tbsp
  • Glycerin - 2 tbsp

Cooking process:

  • Take these two ingredients
  • Mix them well
  • Leave the resulting composition for a day in a cool place to infuse it
  • After 24 hours have passed, add glycerin and granulated sugar to the composition
  • Well mix everything

You can use this composition for children's games.

  • Take a plate, preferably flat. Lubricate it with soapy water. First, inflate a large bubble on this plate. Then disconnect the tube from the edge of the ball, move it inward. Inflate a smaller bubble in this transparent balloon. Repeat this several times. Believe me, your kid will definitely like this game.
  • For very young children, you can arrange a game in which you have to draw with the help of multi-colored soap bubbles. Pour the solution into several glasses at the same time. Add a variety of colors to these solutions. Take a straw. Inflate a soap ball and attach it to a paper sheet. As a result, you will get very unusual pictures.
  • Another interesting game is blowing bubbles in the cold. It doesn't have to be very cold outside. It is enough for the temperature to drop to -7 ° C. Blow one bubble with your child. When the balls land on the snow, they will freeze in a few seconds. Entertaining and very fun.

Making soap bubbles: photo, video

To please the child, you do not need too much time and effort. Prepare such bubbles with your baby and you will see his joyful smile after the result.

Such beautiful bubbles can be made at home. And now we provide video instructions. Do not stop pleasing yourself and children with such simple little things.

Video: How to make soap bubbles at home?

Content

You can give fun and a holiday to children easily and without significant expenses. To do this, you need to independently prepare a solution for soap bubbles. The latter are one of the simplest, most exciting and fun games. It attracts the attention of not only children, but also adults. You can make a suitable composition quickly and in any volume. There are many ways to prepare it, but in any case, certain recommendations must be strictly followed so that the balls are blown easily, are large and do not burst for several seconds.

How to make soap bubbles at home

To make small and large soap bubbles at home, depending on the recipe, you will need water, soap, sugar, glycerin and some other ingredients. Almost all of them are sold in the store, unless glycerin needs to be purchased at a pharmacy. This component is fixing, because. with it, the walls of the balls will be more durable. With proper preparation and optimal composition, they will even bounce off the fingers.

In addition to glycerin, sugar syrup or gelatin can be used as a fixing agent. Professionals who organize soap shows recommend using washing powder with ammonia or polyvinyl alcohol to prepare the composition. It should be emphasized that homemade soap bubbles with glycerin will turn out to be more durable than those that can be purchased at the store.

Having decided to surprise your child on a holiday or on any ordinary day and make him a solution for soap bubbles, first prepare the right water. To prepare the composition, it is better to use bottled or boiled water, i.e. tap water is not suitable for this purpose. Distilled still water is considered a good option. To make a high-quality solution from which you can blow long-lasting non-bursting balls of different volumes, you need to take into account other recommendations:

  • When choosing a soap, dishwashing detergent or powder, pay attention to the composition of the product. The less perfume additives and dyes in the product, the better the soap balls will turn out.
  • Glycerin, like sugar, affects the density of the product and the strength of the blown balls. For this reason, you should not abuse this component, otherwise the solution will be too dense and the bubbles will become difficult to blow out.
  • Soap balls, which are made from a less dense solution, are not as strong (i.e., they burst faster), but they are much easier to blow. This composition is most suitable for kids.
  • Use warm or hot water, but not boiling.
  • In the process of preparation, the components must be mixed with moderate intensity so that the foam is at a minimum. This rule is the key to the success of preparing the composition at home.
  • If possible, cool and keep the finished composition in the refrigerator for 1-2 days.
  • The finished mixture must be insisted for the appearance of a whole soap film on the surface without bubbles and foam. You can remove the latter yourself or wait until it disappears by itself. Cooling the liquid is the easiest way to get rid of unwanted foam.
  • You can make multi-colored bubbles if you dissolve food coloring in the soap base. In order for balls of several colors to spin at the same time, it is recommended to divide the foam into different bottles and add it to each of your paints.
  • It is recommended to blow soap balls slowly and evenly, otherwise the film will quickly tear.
  • Wind and dust in the air have a negative effect on soap bubbles. High humidity is considered an assistant for them.

What determines the quality of the bubbles

To obtain high-quality and long-lasting soap balls, it is necessary to use only proven components. For example, in almost all recipes, a detergent such as Fairy is used as a basis - it has been tested by practice. In this case, you can use any other suitable product. Of particular importance is the degree of mixing, on which the amount of foam obtained depends - it should be as small as possible. The quality of the bubbles even depends on the tools used to blow them.

The proportion of components for the preparation of soap composition

When planning to make bubbles with glycerin, sugar and other ingredients, choose the appropriate proportion. To do this, check out the table:

Water (distilled)

Soap base

Glycerol

dough baking powder

giant bubbles

Mix with sugar

Sugar free mix

Composition and safety rules

You can make beautiful and long-lasting soap bubbles if you put more glycerin in the composition and vice versa. It is very important to use only safe components, especially if the composition is made for a small child. For example, for a soap base, you can take a baby shampoo that does not contain any harmful ingredients. Additionally, consider the following safety rules:

  • while working with the composition, you need to be careful so that it does not get into the nose, mouth and eyes;
  • if splashes from bubbles still get into the eyes, then rinse them thoroughly with clean water;
  • you need to blow soap balls in the direction where there are no people and animals;
  • if the solution is prepared for the baby, then make sure that he does not taste it;
  • after preparing the solution and experimenting with inflating balloons, be sure to wash your hands under running water.

Soap bubbles recipe at home

Today, there are many recipes that allow you to prepare a solution for creating soap bubbles in a matter of time and at low cost. It can be a classic recipe with soap, glycerin and dishwashing liquid, laundry detergent, etc. Sometimes making a soap-based solution involves adding sugar. You can check the quality of the finished composition for soap bubbles as follows: inflate the balloon and touch it with a finger dipped in foam. If it turns out to be of poor quality and bursts, then add soap and a few drops of sugar syrup or glycerin.

Classic laundry soap recipe

Relatively simple but common recipe. To prepare the composition according to it, you will need only three ingredients:

  • water - 500 ml;
  • laundry or glycerin soap without dyes, flavors - 50 g;
  • glycerin - 2 tablespoons.

A jar with the last component can be purchased at almost any pharmacy. Instructions for making a solution:

  1. First, grind your soap. This can be done by finely chopping this component or grating it with a suitable size.
  2. Transfer the crushed soap to any container, fill with hot water and stir until completely dissolved.
  3. If the soap does not dissolve well, then first boil the water slightly - while constantly stirring it. Do not bring the solution to a boil.
  4. If necessary, strain the solution through cheesecloth. After that, add a couple of tablespoons of glycerin to the almost finished composition.

With glycerin

To prepare the composition for bubbles at home, you can take a little more glycerin compared to the previous recipe. Instead of soap, prepare Fairy detergent. The number of necessary components is only three, so this recipe is one of the simplest:

  • soft water (distilled, melted, boiled) - 300 ml;
  • detergent "Fairy" - 100 ml;
  • glycerin - 50 ml.

Find in advance a suitable container for preparing soapy liquid at home. For example, it could be some small basin. Stages:

  1. Fill the basin with warm water in the required amount, but adhering to the strict proportion indicated in the list of ingredients. That is, if it is 900 ml, then the remaining components should also be 3 times more.
  2. Next, pour in "Fairy" and add glycerin. Gently mix the composition, but try not to raise the foam.
  3. Leave to infuse for a day in the refrigerator before use.

From dishwashing liquid

A relatively simple and affordable recipe, all the ingredients for which can be found in almost any kitchen. In this case, you do not have to wait for the soap to melt. To cheer up yourself and your children, use the following components:

  • water - 400 ml;
  • dish detergent - 100 ml;
  • regular white sugar - 2 teaspoons.
  1. First you need to dilute sugar and dishwashing detergent in warm water.
  2. Then carefully place all the ingredients until a more or less homogeneous composition is obtained. Everything, the solution is ready - you can blow soap balls.

DIY soap bubbles for kids

It often happens that while playing with a child, droplets of bursting bubbles fall into the eyes. And then the entertainment is replaced by the screams and crying of the baby. The way out of the situation will be the preparation of a solution with the addition of mild baby shampoo. If it gets on the mucous membranes, such a liquid will not cause severe burning and pain - it is harmless to the baby's skin, does not contribute to inflammation and allergies. To prepare this composition at home you will need:

  • water - 500 ml;
  • baby shampoo - 200-250 ml;
  • granulated sugar - 3 tablespoons.

The cooking process at home is relatively simple. It consists of several stages:

  1. Dissolve the shampoo in the required amount of warm water and let the resulting liquid brew a little. To do this, leave it overnight or better for a day.
  2. After that, it remains to add granulated sugar to the liquid for soap bubbles and mix everything thoroughly.
  3. No more actions need to be performed, because. the solution is almost immediately ready for use.

There is an even simpler recipe, thanks to which your child's childhood will be filled with beautiful bubbles. You will need baby foam from the Little Fairy cosmetics collection. Mix 30 grams of the product with 100 grams of purified water. Such a recipe for creating balls at home is ideal in that you can make the composition in accordance with it almost instantly.


From washing powder

This recipe differs from others in that it may take you several days to prepare a quality solution. For this reason, if you want to please your little one right now, this option for preparing a liquid to create bubbles is definitely not for you. Of the ingredients you will need:

  • water - 300 ml;
  • glycerin - 100 ml;
  • ammonia - 8-10 drops;
  • washing powder - 20-25 g.

If you are thinking about choosing a washing powder, then give preference to a proven option that you often use. If possible, choose high-quality and safe products for health. Instructions for preparing the composition at home include the following steps:

  1. Fill a suitable container with hot water. Add washing powder there and mix everything thoroughly until the latter is completely dissolved.
  2. Then send the rest of the ingredients to the same container. Stir, leave the resulting soapy solution to infuse for two days.
  3. At the end of the period, the liquid must be filtered, and then sent to the refrigerator for several hours, and preferably all night. After that, the solution will be ready for use.

Bubbles that don't pop with sugar

To make non-popping soap balls, you will need to supplement the usual list of ingredients with sugar. To prepare the liquid, prepare:

  • water - 800 ml;
  • glycerin - 350-500 ml;
  • laundry soap - 200 g;
  • sugar - 80 g.

First, prepare your soap. You will need to grate this ingredient on a suitable grater and pour hot water over the resulting chips. Further:

  1. Stir the liquid thoroughly until the soap is completely dissolved in the water.
  2. Next, add glycerin, sugar to the resulting mixture. Mix everything thoroughly.
  3. As a result, you will get a solution that can be used not only to form strong balls, but also various figured bubbles, for example, by blowing them onto a smooth plane of the table.

Also try sticking to a more original recipe that includes corn syrup - this component can be replaced with sugar or glycerin if desired. To prepare at home, you will need water (600 ml), shampoo or dishwashing liquid (200 ml) and 70-80 ml of corn syrup. All that is required is to add syrup, shampoo to water, then mix all the ingredients. If the balloons are a little difficult to inflate, then add some water to the liquid.

Durable giant bubbles

If you want to make not only large, but also strong balls from a solution at home, then buy gelatin in advance. The resulting solution can be used to organize bubble shows, which are often seen at birthdays, weddings and other festive events. You can arrange such a show on any ordinary day for both children and friends. To make soap bubbles at home, you will need the following ingredients:

  • water - 800 ml;
  • dishwashing detergent - 200 ml;
  • glycerin - 150 ml;
  • granulated sugar - 50 g;
  • gelatin - 1 sachet (30-40 g).

It is better to prepare liquid for the formation of giant bubbles in a wide basin. After preparing the composition, you don’t have to blow out the balls, you just need to immerse a hoop or a large frame made of flexible material into the liquid, and then gently pull out the giant bubbles. At first, it is unlikely that you will be able to form really large, beautiful balls, but with a little practice, you will be able to surprise your loved ones and friends with your skill. Step by step instructions:

  1. First of all, prepare the gelatin. Soak this component in a small amount of water according to the instructions on the packaging. Leave to swell and then strain.
  2. Mix the prepared gelatin with sugar. Melt the mixture, but do not bring it to a boil. You can do this in a microwave oven or in a water bath.
  3. Add the resulting mixture of gelatin and sugar to 800 ml of warm water. Send all the rest of the ingredients there.
  4. At the end, it remains to mix everything thoroughly.

Check out another recipe for preparing liquid to create giant strong bubbles. You will need to mix together glycerin, gel, dishwashing detergent. Then add distilled water (hot) and mix all the ingredients, being careful not to create foam. From such a solution, “survivable” balls will be obtained that will not burst even during contact with water. Ingredients:

  • distilled water - 0.8 l;
  • thick dishwashing detergent - 0.2 l;
  • gel lubricant without impurities - 0.1 l;
  • glycerin - 0.1 l.

How to blow soap bubbles

If you are making soap balls outdoors, be prepared for the final result to depend on the weather. Dust and strong winds are the real enemies of these balloons. In addition, you should not let them out on a hot and dry day when the air temperature reaches 25 degrees or more. High humidity becomes a real helper in this matter. Best results can be achieved in the morning or evening after watering the lawn or rain.

When blowing bubbles at home, try to avoid strong drafts. At the same time, the room should not be dusty, dry, hot. Please note that the balls during bursting leave marks on furniture, linoleum, parquet. Various tools are used to create them - some even use special generators. An affordable and cheap option is a factory blower stick. You can make suitable fixtures at home yourself:

  • An excellent option would be a wire that needs to be twisted into a loop.
  • A worthy alternative is a straw or straw for cocktails. To make the balls large, make several longitudinal cuts at the end of the tube.
  • Some hobbyists use a plastic bottle that needs to be cut off the bottom, or figured molds designed for dough.
  • If you do not have any devices at hand, then you can launch the balls with your fingers. To do this, fold your thumb and forefinger into a ring.
  • To blow giant balloons, use a loop device that consists of two sticks. The latter are connected to each other, forming a loop. First, dip the ropes in the liquid. After that, they are bred on the sides and make movements with their help in a horizontal or vertical plane.

Video

Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!

Photo by Getty Images

One of the most fun, romantic, simple and exciting things to do is soap bubbles. This fun will appeal to everyone without exception. What is especially nice - you can buy a bottle with a solution for soap bubbles inexpensively, and making homemade soap bubbles yourself is even easier, and quickly and in any volume.

The main components of the solution are water, soap, glycerin or sugar. But it is important to follow some recommendations that will allow you to prepare such a solution for soap bubbles that the balls will be blown easily, turn out to be large and will not burst in the next few seconds.

To prepare the solution, it is better to use not tap water, but boiled, and even better - distilled. There are a lot of salts in tap water, and the less impurities in the components of the solution, the better the quality of the soap film.

For a greater density of the solution, and therefore, greater strength of future balls, use glycerin or sugar. Liquid glycerin in a pharmacy can be bought for 20 rubles.

When making homemade soap bubbles, do not overdo it with glycerin or sugar, otherwise the solution will turn out to be too dense and the bubbles will be difficult to blow.

Less stable bubbles are blown out of a less dense solution, but they are blown out easily, which is optimal for babies.

If possible, soak the finished solution for 12-24 hours, and only then start! Some experts advise keeping the solution in the refrigerator for better bubble quality. During this time, the foam will settle - it is not needed in the solution.

Wind and dust are the enemies of soap bubbles; high humidity is a helper.

From laundry soap

You will need:

10 cups of water, 1 cup of grated laundry soap, 2 teaspoons of glycerin (or a solution of sugar in warm water, you can add gelatin).

How to do

Pour soap into hot boiled water and stir until completely dissolved. If dissolution is difficult, heat the mixture while stirring continuously. Do not bring to a boil!

Instead of household soap, you can use olive or almond oil soap, but not perfumed toilet soap - there are additives that are unnecessary in this case.

Soap bubbles are easy to make with your own hands

Photo by Getty Images

From liquid soap

You will need:

100 ml of liquid soap, 20 ml of distilled water, 10 drops of glycerin.

How to do

Mix soap and water, wait for the foam to settle (this will take approximately 2 hours), then add the glycerin. Let the solution brew, preferably in a cold place.

From dishwashing liquid

You will need:

1/2 cup dishwashing liquid (not for dishwashers!), 2 cups water, 2 teaspoons sugar.

How to do

Mix all ingredients thoroughly. Ready! Instead of sugar, you can use 1-2 tablespoons of glycerin. And if you put the solution in the refrigerator for a day, the bubbles will turn out notable!

From baby shampoo

You will need:

200 ml of baby shampoo, 400 ml of distilled (boiled) water, 3 tablespoons of glycerin or 6 teaspoons of sugar.

How to do

Mix the shampoo with water and leave to infuse for a day. Then add glycerin (or sugar).

From sugar syrup - for experiments

You will need:

1 part concentrated sugar syrup (proportion: 1 part water 5 parts sugar: for example, 50 g sugar - 10 ml water), 2 parts grated soap, 4 parts glycerin, 8 parts distilled water.

How to do

With this solution, you can, for example, build various figures from soap bubbles by blowing them onto a smooth table surface.

Photo by Robin Knight/Moment/Getty Images

For children's party

You will need:

50 ml glycerin, 100 ml dishwashing detergent, 4 tsp. sugar, 300 ml of water.

How to do

Giant soap bubbles can be blown out of these ingredients. The solution can be prepared in a basin, and blown out with a gymnastic hoop or a frame specially twisted from wire. You don’t even have to blow, you just have to swing the frame or slowly pull a large, strong bubble out of the basin with the same frame or hoop.

From washing powder

You will need:

3 cups hot water, 2 tbsp. l. powder, 20 drops of ammonia.

How to do

The solution should be infused for 3-4 days, then it must be filtered. This, of course, will take time, but knowledgeable people assure that the bubbles from such a solution are large and beautiful, as in the show.

Large (from 1 meter in diameter) bubbles

Recipe #1

0.8 l of distilled water, 0.2 l of dishwashing detergent, 0.1 l of glycerin, 50 g of sugar, 50 g of gelatin.

Soak gelatin in water, leave to swell. Then strain and drain off excess water. Melt the gelatin with sugar without boiling. Pour the resulting liquid into 8 parts of distilled water, add the remaining ingredients and mix without foaming. This solution produces particularly large and firm blisters and is non-toxic.

Recipe number 2

0.8 l of distilled water, 0.2 l of thick dishwashing detergent, 0.1 l of clear lubricant gel, 0.1 l of glycerin.

Mix gel, glycerin and dishwashing liquid. Add hot distilled water and mix thoroughly without creating foam. From such a solution, especially “tenacious” bubbles are obtained that do not burst even when in contact with water.